Мельница ультратонкого помола_Промышленная мельница

Мельница ультратонкого помола

Mодель HGM

Крупность на входе 0-25mm

Производительность 0.5-15tph

Написать письмо

Оставьте заявку

HYM ultra-fine powder grinding mill can grind kaolin, limestone, calcite, marble, talc, barite, gypsum, dolomite, bentonite, mica, pyrophyllite, sepiolite, diatomite, graphite, alumite, fluorite, potassium etc., more than 100 kinds of non-flammable and ex

Каталог оборудования

Compared with jet mill, mixing grinder and ball mill of same finished product size and motor power, MW Micro-Powder Mill has double capacity and saves 30% energy.
The product size can be adjusted between 325 mesh to 2500 mesh (47-5micron).
The application of pulse dust collector and muffler greatly reduce dust pollution and noise.
Forged by special material, the ring and roller can be used for about one year while grinding calcium carbonate.

Принципиальная структура продукта

The motor drives the main shaft and the turntable to rotate through the reducer, and the turntable drives dozens of annular rollers to roll and rotate in the grinding ring raceway by pins. The annular rollers are installed in multiple layers. The material is crushed into small particles by the hammer crusher and then transported to the storage bin by the elevator. The electromagnetic vibrating feeder evenly sends the material to the upper bulk tray. The material is scattered into the raceway of the grinding ring under the action of centrifugal force and is squeezed and ground by the annular grinding roller. The suction action of the high-pressure centrifugal fan sucks the outside air into the machine and brings the ground material into the classifier. The rotating turbine in the powder separator makes the coarse powder fall back for regrinding, and the fine powder enters the cyclone powder collector with the air flow and is discharged from the discharge valve at the bottom of the powder concentrator. After purification, the air is discharged through the fan and muffler.

Параметры устройства

Model	HGM60	HGM80	HGM90	HGM100	HGM125	HGM168
Number of Ring rollers (pcs)	12	21	24	36	44	44
Working diameter(mm)	Φ600	Φ800	Φ900	Φ1000	Φ1250	Φ1680
Number of grinding rings and raceways (pcs)	1×3	1×3	2×4	2×4	2×4	2×4
Rotation speed(r/min)	230-240	230-240	200-220	180-200	135-155	120-130
Max feed size (mm)	≤10	≤10	≤20	≤20	≤20	≤20
Final size (mesh)	325-2500	325-2500	325-2500	325-2500	325-2500	325-2500
Output (t/h)	0.3-3	0.5-4.5	0.8-6.5	1-8.5	2.5-14	5-25

Трапецеидальная мельница Европейского типа Вертикальная мельница по серии

относительные устройства

Связанные случаи